Arrows Hobby Red BEA hawk 50mm PNP RC Airplane
1.A 2627 4500KV brushless motor is pre installed inside
2.it requires 4 Channel Radio,4 Channel Receiver
3.it requires 3S 1300- 2200mAh 30C LiPo with XT60 connector

it is made in China Arrow Hobby ,100% original,
The powerful and perfectly formed the Arrows Hobby Hawk will be something of an eye-opener to anyone who still thinks EDF jets have some catching up to do. Experience the Hawk in action and you'll quickly realise that nothing could be further from the truth. Packing a sweet-sounding 50mm 11-blade fan that's spun up by a precision 2627 4500KV brushless motor, this 3S-fuelled semi-scale Red Arrows jet can't fail to delight with its flowing aerobatics, cloud punching performance and exceptional speed. But that's not the half of it, the Hawk is also a beautifully practical model that exhibits exceptional low speed handling, is small enough to transport in one piece, is retract (hassle) free and, moreover, gets away easily from an underarm launch. Given that it's enticingly budget-friendly and such a good performer, we just know that the Hawk will become a frequent flyer in your air fleet and, of course, that equates to superb value for money.
Features
- High quality pre-painted EPO foam airframe.
Glue- and screw-together assembly.
Proven pre-installed hardware.
Superior ball joint control linkages.
Outstanding power-to-weight ratio.
Secure magnet-retained canopy.
Retract-free, fly anywhere simplicity.
Suits 3S 11.1V 1300 - 2200mAh 30C LiPo.
Three pre-installed high-quality digital servos.
Takes standard 4-channel radio (aileron, elevator, throttle).
Smooth-sounding 11-blade fan.
30-minute assembly time.
8+ minutes on a 2200mAh LiPo.
What is details in the Box
1x Factory assembled and finished fuselage.
1x Factory assembled and finished 1-piece wing.
1x Factory assembled and finished 1-piece tailplane.
1x Pre-installed 2627 4500KV brushless motor.
1x Pre-installed 50mm 11-blade fan.
1x Pre-installed 30A ESC with XT60 connector.
3x Pre-installed high quality 9g digital servos.
1x Screw set.
1x Comprehensive instruction manual.
requires:
This is a PNP Version RC Airplane
it requires
1x 4-channel transmitter and receiver combo.
1x 3S 1300- 2200mAh 30C LiPo with XT60 connector.
We recommend the Overlander Fullymax 1300mAh 11.1v 3S 100C FPV Li-Po Battery.
